🚀 go-pugleaf

In article <1992Aug15.202637.2558@rhrk.uni-kl.de>, m_sattle@tangram.informatik.uni-kl.de (Matthias Sattler) writes:
> In <1992Aug6.094438.9971@slcs.slb.com> long@scr.slb.com (Peter Long) writes.
> 
> 
>> There was some mention of a mode 1024x768x16, is it possible to post
>> the setup for this mode I have not been able to replicate it on my
>> A5000 or A540.
> 
> 
> 
> 
> O.K. here it is. This mode can be used on A540 and A5000 but it will only have
> 36Hz picture frequency. If clock your VIDC with 50 Mhz it will have 50Hz then
> (I tried this and it worked fine except that 50Hz is still too flickery
> for me).
> If you choose 60Mhz for your VIDC it will have 60Hz but my VIDC didn't do this
> (as I wrote in my previous article).
> *sniff*

[code deleted]

How do you clock the VIDC with 60MHz? Do you just replace the quarz in the 
VIDC enhancer? Are there any known problems (apart from the one you mentioned)
that may cause damage to the VIDC?
The cooling of the VIDC could be done with a product called Icecap. I don't 
know if there is one that fits the size of the VIDC, though.

laci
 
> 
> Matthias Sattler
> e-mail: @uni-kl.de:m_sattle@poker.informatik.uni-kl.de
> (Funny but this works.)
> 
> 
> PS: Gerben I got your mail but I can't mail outside Kaiserslautern to
> answer you.
-- 

*******************************************************************************
*             Laci Gaspar, University Basel, Switzerland                      *
*******************************************************************************