Article View: comp.sys.acorn.tech
Article #881Arm mippage.
From: John O'Malley
Date: Mon, 11 Jan 1993 11:07
Date: Mon, 11 Jan 1993 11:07
18 lines
1181 bytes
1181 bytes
Just a quicky from memory. I remember that in apples evalutaion of the ARM 610, for there new newton handheld thingy, they ran a 20mhz ARM 600 and it apparently ran at an equivilant mippage to a 25mhz 486 or a 40 mhz 68040, noting that the fastest Mac uses a 33 mhz 68040. The other good thing about the ARM, is that no other chip can match it for low power consumption at these speeds. Read this months byte for information on Amulet an aschyncrounous implementation of the ARM architechture which will, if it works run very, very fast indeed. No flames please this was all from memory. Jim. -- ================================================================== | James Herbert | | | J.Herbert1@lut.ac.uk | You see that PC compatible.... | | | That's you that is. |
Technical Details
Message-ID:
<1993Jan11.110759.13622@lut.ac.uk>Path:
arc1-ca.pugleaf.net!sparky!uunet!pipex!bnr.co.uk!uknet!keele!nott-cs!lut.ac.uk!cojhShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!bnr.co.uk!uknet!keele!nott-cs!lut.ac.uk!cojh From: J.Herbert1@lut.ac.uk (John O'Malley) Newsgroups: comp.sys.acorn.tech Subject: Arm mippage. Message-ID: <1993Jan11.110759.13622@lut.ac.uk> Date: 11 Jan 93 11:07:59 GMT Reply-To: J.Herbert1@lut.ac.uk (John O'Malley) Organization: Loughborough University, UK. Lines: 18