Re: problems with time on RISCOS 3.1

Thread View: comp.sys.acorn.tech

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by /G=Rhodri/S=James/O=SJ-Research/... Fri, 20 Nov 1992 18:31

#575

Author: /G=Rhodri/S=James/O=SJ-Research/...
Date: Fri, 20 Nov 1992 18:31

22 lines
1489 bytes

blacka@logica.co.uk writes:

>I recently discovered a number of problems in RISCOS3.1time
>handling

[details omitted for reasons of space]

I note that in a later post you say you are running RO3.10 in an A420.  When
you put the new ROMs in, did you do a PowerOn-Delete (or similar) to clear
the CMOS RAM?  If not, your time zone could be (and probably is) set to
anything, and could easily give the bizarre responses mentioned above.

A general note, folks; always, always, always reset your CMOS RAM on
switching from RO2 to RO3 (or vice versa), as the allocations have changed!

---
Rhodri James                   *  Disclaimer:  These opinions are shareware,
SJ Research Ltd, Cambridge     *    and may only be used if you send off
Rhodri.James%gb.INTERSPAN.sj   *    $100 registration fee in used fivers.
            @mhs-relay.ac.uk   *    SJ Research is not registered with me.
   or                          *
rmj10@phx.cam.ac.uk            *             Wombats are go!

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads