Re: Screen goes white while accessing drive

Thread View: comp.sys.acorn.tech

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Pete Goodwin Tue, 15 Dec 1992 08:42

#640

Author: Pete Goodwin
Date: Tue, 15 Dec 1992 08:42

22 lines
1368 bytes

In article <gilbertd.724342653@cs.man.ac.uk>, gilbertd@cs.man.ac.uk (David Alan Gilbert) writes...
>Hi All, Does anyone have the same symptoms?
> 
>I've got Risc OS 3.1, ARM 3 (Leading edge) Morley
>uncached SCSI card.  When I copy a lot of stuff
>from floppy to hard drive in say mode 16 occasionaly
>the screen goes white for a second or two - while
>accessing the hard drive.  I didnt think this
>should happen with an ARM 3 and I definitly
>thought it shouldnt happen on hard drives.

With an ARM2 and certain modes, accessing the hard disk would blank the screen.
Since the memory bandwidth is tight on certain 256 colour modes, RISC OS drops
the video in favour of data from disk.

With an ARM3 the situation is still possible - after all your main memory is
running at 8MHz (I assume you've got an ARM3 upgrade?), and it's still possible
to have tight bandwidths!

Pete Goodwin
goodwin@edieng.enet.dec.com

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads