Thread View: comp.sys.acorn.tech
1 messages
1 total messages
Started by Colin Smale
Wed, 16 Dec 1992 23:33
Printing Problem
Author: Colin Smale
Date: Wed, 16 Dec 1992 23:33
Date: Wed, 16 Dec 1992 23:33
21 lines
1427 bytes
1427 bytes
I have just been printing an Impression document to my ageing dot-matrix printer by 'printing' first to a file, and subsequently dragging the file onto the printer icon after configuring it to use the parallel port again. The Printout file was +/- 100K in length. After about 2/3 or 3/4 had been printed, I got an error box with the message 'Internal Error: Address Exception at &038B5BE0'. This points to somewhere within the BASIC module. I tried several times, with the same result, albeit at very slightly different points on the page; I tried keeping an eye on the Queue, and it appeared to occur as the percentage indication (which is wrong, as it counts the bytes put into the buffer so it is based on 32K more having been printed than has actually hit the paper) reaches 100%. Printing the same document directly goes OK. The actual size of the Printout file was 102951 bytes. Anyone got any clues? Colin Smale -- Snail-mail: Colin Smale, Spechtenkamp 87, NL-3607 KE Maarssenbroek, NL Tel.: +31 3465 69038 (voice) E-mail: colin@integrity.nl
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads