Path: kirk.fmi.uni-passau.de!beck

Thread View: comp.sys.acorn.tech

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Carsten Beck Tue, 05 Jan 1993 04:03

#824

Author: Carsten Beck
Date: Tue, 05 Jan 1993 04:03

15 lines
973 bytes

Hi,

recently there has been a posting in this newsgroup or comp.sys.acorn about the availability
of 3d system icons under RISCOS 3.10. However, to activate them one/several flags
should be set in cmos ram -- but this feature doesn't seem to be officially documented :-(
Could any kind netter please mail me which bits to set/reset or give any hint
where to find this info ?

thanks in advance

-- 
Carsten Beck					Tel.: 	+49 851 73993
Student of CS					E-Mail:	beck@kirk.fmi.uni-passau.de
Unversity of Passau, Germany

Re: Path: kirk.fmi.uni-passau.de!beck

#829

Author: Carsten Bussmann 29207253
Date: Tue, 05 Jan 1993 14:40

17 lines
1043 bytes

Hallo Carsten (netter name, heisse auch so ),
du musst einfach in basic folgendes tun:

REM read byte
SYS"OS_Byte",161,&1C TO , byte%
REM EOR byte with mask for bit 1
byte% = byte% EOR 1<<1
REM Write back again
SYS"OS_Byte",162,&1C,byte%
END

viel spass damit!
mail mich mal, was fuer eine maschine hast du, was machst du damit?
studierst du in passau, wenn ja, was?

bis dann, Carsten
bussmann@namu01.gwdg.de

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads