🚀 go-pugleaf

>On 9 Apr 1996 15:25:03 GMT, Charlie Moody wrote:
>: I never heard anything back from SoftWood regarding the comments and
>: suggestions I posted here some months back, so this time I'm posting a
>: request for help.
>
>: Final Writer, on my machine, will not recognise the top and left margins
>: when printing.
>
>A gentleman mailed me a request for information about my setup, so I'm
>breaking the taboo against following up one's own post in order to add
>the info to my request for help.

OK ... Charlie, try these settings IF you are using continuous paper!

Page Setup: 'custom', '8.5', '11.0', 'tall', 'right only' pages,
'continuous', left margin= '0.25', right margin= '0.25', top
margin='0', bottom margin= '0'.

Section Setup: LayOut ... top='1.0', bottom='1.0', inside='1.0',
outside='1.0', header='0', footer='0',display on all
pages,columns='1'.

I use this with a 24 pin Panasonic printer with Wolfe Fausts'
PanaPrefs Driver setup. 

>Regarding driver settings, I've tried page lengths from 60-66 lines, and
>margins from 1/80 to 6/74, tho theoretically the WP should be setting all
>the margins.

This is correct! Also, when you go to print, check these settings:

Settings='graphic', print section='main', paper='all', collate='all',
order='front to back', print to:='graphic(final)', paper feed=
'continuous'.

These settings all work to print just fine for me and my kids on the
above printer. I have an A3000/25 with 2.1 OS and FW 4.01 ...

>Again, this is a call for HELP.  Woody, I know you read everything here
>that mentions your products:  calling your phone support has been costly,
>time-consuming and ineffective.  I'm not criticising, I just want my copy
>of your word processor to work like a word processor, not like a fancy
>text editor.  I've upgraded twice;  I've been patient;  I've tried going
>thru channels;  *PLEASE* help me resolve this!

Someone, a long time ago, walked me thru this and gave me all these
settings way back with FC or maybe the original FW2-3? I have never
changed them cause they work.


Gary Peake       "Mystic Meg"                      Unelected Official          
     
Gemini2@cup.portal.com    1:106/7512.1                 Team AMIGA  
                                                 
              Proud supporter of Amiga Technologies/VisCorp   

... At this rate you'll define the BS in BBS!

-*- ASTG 1.9