🚀 go-pugleaf

In article <2466.6678T936T2013@crl.com>,
Joseph Waldvogel <joewald@crl.com> wrote:
>
>commpression or MNP-5 Data commpression then a higher setting is needed, at
>least 57600.  The Amiga's Stock Serial port has problems with anything over
>38.4K  in MOST cases, unless you have a Zorro card with Serial ports that your
>using, or If your using a Graphics Card that takes a load off the Amiga's
>processor, you can get a higher setting and not have data overflow, getting a
>lot of resends and just making the file transfer take longer then if you where
>just set at 38.4k.  A 040/060 processor can also allow a higher setting, but a
>serial port with a uart chip is much much better.
>
>P.S.  I use the normal Commodore serial.device driver.
>

That's your problem. Using 8n1.device and a pair of 25 MHz A3000s I get null
modem transfers at 115 kbips without difficulty, and get very few errors at
230 kbips.