CV and mode adjustments

Article View: comp.sys.amiga.graphics

Article #9141

Back to comp.sys.amiga.graphics Previous Next

#9141

From: Marcus Damberger
Date: Wed, 10 Apr 1996 22:07

16 lines
1285 bytes

   I have both Emplant and the Cybervison graphics card. I've noticed that
in some modes with the CV the monitor will have a sort of fringing on the
edges of all graphics on screen. This is rather annoying to look at. So I
made some adjustments to the screen setup on the Amiga side (this problem
appears on both the Amiga and Mac) using the CVMode program. This fixed
the problem alright for the Amiga side, but it did not effect the Mac
side. The strange thing is that when running the Mac in 256 colors there
is no fringing but when I run in thousands by thousands it appears again.
Also, when I run in millions by millions the screen shifts to the right
and get smaller but no fringing. It seems that each screen depth is set up
different on the Mac. But the selection says the same resolution.

So, how do you change the Mac screen settings so they work right with my
monitor? Thanks in advance.

      -Marcus Damberger / N9RZE Amateur Radio

Technical Details

Message-ID: <n9rze-1004961607430001@ruger-3.slip.uiuc.edu>

Path: arc1-ca.pugleaf.net!ruger-3.slip.uiuc.edu!user

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!ruger-3.slip.uiuc.edu!user
From: n9rze@prairienet.org (Marcus Damberger)
Newsgroups: comp.sys.amiga.graphics
Subject: CV and mode adjustments
Date: Wed, 10 Apr 1996 16:07:43 -0600
Organization: Prairienet
Message-ID: <n9rze-1004961607430001@ruger-3.slip.uiuc.edu>
NNTP-Posting-Host: ruger-3.slip.uiuc.edu