🚀 go-pugleaf

>NEW FORUM FOR VLAB MOTION / MOVIESHOP USERS

>Like many other users of the fine and unique Macrosystem NLE products, I
>have been frustrated by the difficulty in making contact with other
>users.  This has nothing to do with tech support, which in the US has
>been great (Thanks, Sherwood!), but I want to be able to discuss
>problems, techniques, and issues with others.

>Most of the information I have been able to find has been scattered
>through the Amiga newsgroups and is hard to follow amidst the zillions of
>other threads.  I have refrained from posting, as I didn't think too many
>would be looking there in the first place...

>Thanks to "list-owner" Bill Ranck at Virginia Polytechnic (US), we are
>cleared to use an obsolescent Listserv e-mail list called VIDEOTEC.  The
>advantages to this are that people without Usenet access (but obviously
>with e-mail) can be included, and that VLab Motion / MovieShop / Draco /
>etc. can be discussed in a noise-free environment, at least for now.

>To join VIDEOTEC, send an e-mail message to LISTSERV@VTVM1.CC.VT.EDU with
>no subject, containing only the line SUBSCRIBE VIDEOTEC [your name].  You
>should receive confirmation and information on setting your "preferences".

>Please note that I have just found this forum and don't have the knowledge
>or access to moderate or maintain the list.  Mr. Ranck was kind enough to
>let this little marauding band of very particular video folks use the list
>he maintains.  Please follow the Listserv instructions carefully and
>hopefully we won't wear out our welcome.

>In particular, the thing that I have seen drive other list owners and
>subscribers nuts is when people try to send Listserv command (subscribe,
>digest, unsubscribe) to the list (VIDEOTEC) address rather than to the
>Listserv address.  If you haven't used e-mail lists before, don't be
>frightened -- just do what the instructions suggest.

>Enough lecturing.  I hope VLab Motion users will pass this information on
>to others so we can have a lively and useful forum for all who are
>interested.  Hope to read you on VIDEOTEC!

>Steve Braker
>                                .::.
>   +001 (608)635-7170     WORTHWHILE       605 McMillan Road
>braker@danenet.wicip.org        FILMS   Poynette, WI 53955  USA
>                                `::'
>media production for nonprofits     and other worthwhile causes

Hey!

We pointed out this problem to MacroSystem (germany) and they faxed me back
and promised internet support in some form soon. Hopefully a newsgroup and WWW
page with fpt files.


        Örebro Videoreklam - We sell Amiga/Draco products!
        --------------------------------------------------
          Videoproductions - 3D graphics - Renderservice
       Nonlinear editing - Vlab Motion/Toccata/Draco/Amiga
     Tel/fax +46-(0)19-123807 - videoking@mbox200.swipnet.se