🚀 go-pugleaf

In article <4kor0p$fd8@news.aloha.com>, lo@kokee.hawaiian.net says...
>
>  I can't get this combination to work, same with digipaint3.
>I get alerts and out of memory errors (false).
>
>  Would it be better to get a rom switcher or try to find
>higher versions of these newtek products?
>
>  Thank you
>
>--
>
>-------------------------------------------------------------
> Robert     ////\  Lopaka    lo@hawaiian.net
>Holtwick   ////_\\ 2000'030 @50Mhz/Picasso II/SupraFax
>          ////  \\\ miga... Todays Technology 10 years ago
>-------------------------------------------------------------

This will actually work. You must boot to a certain resolution and then change 
once the program has loaded. Try selecting 640x400 640x480 and then after it 
loads change to what you want. 

I tried to contact NewTek Tech support a long time ago about upgrades to fix 
this and support AGA but they had/have no interest in this product.

As for Digi Paint, I quit using it along time ago. 

Good Luck, Jeff

Lopaka (lo@kokee.hawaiian.net) wrote:
:   I can't get this combination to work, same with digipaint3.
: I get alerts and out of memory errors (false).

I *used* to not have DigiView 4.02 work with my 'normal' setup (1200,
3.0 roms, 3.1 setpatch, many random things), and had to reboot with
no startup to use it, but on a whim, i tried launching it a few days
ago in my normal environment, and much to my surprise, it worked
perfectly.

In fact, i just popped it up and digitized a frame off the first
tape that was handy. 320x400, greyscale, no stupid "out of memory"
problems. With AmiTCP up and running.

Unfortunately, i haven't the foggiest idea WHAT i used to have in my
system that caused the problems, what i removed or added. One possible
reason for it working that i can think of offhand is that i now use an
AllocMem() patch that does a simple attempt to avoid memory fragmentation
(lowfrag.lha, SOMEwhere on Aminet)...

It *will* work with AGA and 3.1, but i don't know what makes it work or
not work...

--
    "But I don't want no tea. It gives me a headache." - Pete Puma
paul trauth: cartoonist, animator, programmer, raccoon.   raccoon@gs.net

On 13 Apr 1996, Lopaka wrote:

>   I can't get this combination to work, same with digipaint3.
> I get alerts and out of memory errors (false).
> 
>   Would it be better to get a rom switcher or try to find
> higher versions of these newtek products?

Are you by any change trying to  use it on an a3000 ?

I know a special version (4.03???) was needed to get it to work on those, 
don't know where to get it though (i would also like a copy).

Send replies to dteunis@zorro.ruca.ua.ac.be as above address does not seem 
to work

deGroeten
Dirk

  ("`-''-/").___..--''"`-._
   `6_ 6  )   `-.  (     ).`-.__.`)
   (-Y-.)'  ._   )  `._ `. ``-..-'
 _..`--'_..- /  /--'_.' ,'
(il),-''  (li),'  ((i.-'