Thread View: comp.sys.amiga.introduction
2 messages
2 total messages
Started by ROB KNAPP
Fri, 29 Mar 1996 15:44
PPP.eval timeout? And other questions....
Author: ROB KNAPP
Date: Fri, 29 Mar 1996 15:44
Date: Fri, 29 Mar 1996 15:44
29 lines
1656 bytes
1656 bytes
Hi, I think this really belongs over on on the networking board, but I never read that.... Here is the problem. I just switched providers, and have been trying to connect via PPP(at 9600 baud). I finally got PPP to work, kind off. The log says that it negotiated the ip addresses and everything.... and then there is suddenly a time out, and the modem hangs up. I have the Log from at 40 level, if that would help..... Also, I have just upgraded my homepage to be Netscape/IBrowse compat., (with option for a textbrowser or Mosaic) and I can't up load the F*&%($*&ing .html or .gifs. I type rz, and sit there and wait for about 3 or 4 minutes until I get really frustrated and stop the transfer. I'm using term 4.6 and xprzmodem.library provided with that. Two weeks ago I could upload no problem. I uploaded one file, did some dickering with another, and when I went to upload that, that was when there was the problem. I've tried at different provider w/ the same results, and with BaudBandit.device and 8n1.device as well as plain ole serial.device(at a lower baud). So I don't think it's the device or the provider, VirusWorkShop doesn't report any viruses hanging out.... Could it be a memory conflict w/ one of my commidties??? Some one please help me!!!!!
Re: PPP.eval timeout? And other questions....
Author: John S. Burger
Date: Sun, 31 Mar 1996 03:37
Date: Sun, 31 Mar 1996 03:37
58 lines
3136 bytes
3136 bytes
On or about 29-Mar-96 20:44:35 ROB KNAPP typed the following words about
"PPP.eval timeout? And other questions....". My reply is thus...
Hi ROB,
RK> Hi, I think this really belongs over on on the networking board, but I
RK> never read that....
RK> Here is the problem. I just switched providers, and have been trying to
RK> connect via PPP(at 9600 baud). I finally got PPP to work, kind off. The
RK> log says that it negotiated the ip addresses and everything.... and
RK> then there is suddenly a time out, and the modem hangs up. I have the
RK> Log from at 40 level, if that would help.....
RK> Also, I have just upgraded my homepage to be Netscape/IBrowse compat.,
RK> (with option for a textbrowser or Mosaic) and I can't up load the
RK> F*&%($*&ing .html or .gifs.
RK> I type rz, and sit there and wait for about 3 or 4 minutes until I get
RK> really frustrated and stop the transfer.
RK> I'm using term 4.6 and xprzmodem.library provided with that. Two weeks
RK> ago I could upload no problem. I uploaded one file, did some dickering
RK> with another, and when I went to upload that, that was when there was the
RK> problem.
I don't know how you were able to upload through ppp.device using a term
program unless you use telser.device in the term program. Unless your previous
ISP was just a BBS that allowed you to connect to the internet through them.
If you are connecting to your ISP via ppp.device you must use telser.device in
your term program. Also you can't use zmodem if you are connected via
ppp.device. The protocol used to transfer files over the internet is called
FTP
RK> I've tried at different provider w/ the same results, and with
RK> BaudBandit.device and 8n1.device as well as plain ole serial.device(at a
RK> lower baud). So I don't think it's the device or the provider,
RK> VirusWorkShop doesn't report any viruses hanging out.... Could it be a
RK> memory conflict w/ one of my commidties???
RK> Some one please help me!!!!!
--
// -= John =- jsburger@xmission.com BIX: jburger
\X/ Via
Amateur Radio KB0ES T
Amiga 2000 H
A2630 A2632 John S. Burger Hooper, UT O
2+14megs RAM R
850meg HD This message was composed on... 2.23ß
Iomega ZIP 31-Mar-96 08:29:36 MST
--
I think he's a few strings short of a violin section.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads