Thread View: comp.sys.amiga.introduction
1 messages
1 total messages
Started by Charles J. Fitzhugh
Mon, 15 Apr 1996 04:57
Help ScreenMode/Printer Problems
Author: Charles J. Fitzhugh
Date: Mon, 15 Apr 1996 04:57
Date: Mon, 15 Apr 1996 04:57
36 lines
2135 bytes
2135 bytes
Hiya. first, if you are reading this... then I am supprised... I have a terrible news server here... but I'm desparate for help. I have a paper due soon... and I need to print a gfx file that I mainted with DPaintIV AGA... but each time I try, it will not print... I makes a few noises and then just sits there... I have tried each and every setting in the pringer prefs of OS 3.1. The printer prints fine with text otput, and with gfx with FinalCopy... but not with DPaint or anything else that prints single images... I have also been having constant screen mode problems... I use a 1084s monitor and have set it's screen adjustments to pal... terminus, WB, DOpus, etc will work okay in pal... they all have optionals for screen modes... but anything else... is screwy... they either switch to ntsc which chops the bottom of the screen off... it it goes to pal, but still, the bottom of the screen is choped... either way, I can not seem to get true pal screens. The boot menu on the 1200 (ONCE IN A WHILE) will work, but again, sometimes it does not. (OCTAMED 4.00g is a good example) My old 500 had a hardware switch... it worked better than this 1200 is working. would these two problems be connected in regards to the 1200 chips? any help would be very much appreciated. my system: 1200HD OS 3.1 Kick 3.0 HP600c printer with 500c and 550c drivers... 1084s monitor help... -- *---------------------///---------------------------------------------------* | Charles J. Fitzhugh/// sirfitz@kaiwan.com / finger for PGP \|/ | | Sir Fitz \\\/// http://www.kaiwan.com/~sirfitz/ (o o) | *Long-Beach-CA-USA\XX/Sandra-Bullock-Web:/~sirfitz/bullock.html-oOo-(_)-oOo-*
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads