Re: Proper mask, transfer rate, etc.

Article View: comp.sys.amiga.multimedia

Article #1645

Back to comp.sys.amiga.multimedia Previous Next

#1645

From: Mark Worden
Date: Thu, 04 Apr 1996 19:14

15 lines
1167 bytes

Mark Worden (mworden@public.compusult.nf.ca) wrote:

: Can anyone tell me what the proper mask, transfer rate, etc. should be on 
: my A3000 with 100MB Quantum hard drive and a Zip drive?  Both drives have 
: been formatted with the Fast File System (I have Workbench v2.1).

: I checked out these settings using HDToolbox, and for my Zip drive these 

Darn!  I was in the wrong newsgroup when I posted this...sorry!

--
/ Mark Worden                           mworden@public.compusult.nf.ca \
| St. John's, Newfoundland, Canada      Member of TEAM AMIGA           |
| "The smallest good deed is greater than the best good intention."    |
\ "John Doe: generic tractor the John Deere Co. is coming out with."   /

Technical Details

Message-ID: <4k172i$ddo@hobbes.compusult.nf.ca>

Path: arc1-ca.pugleaf.net!news.compusult.nf.ca!mworden

References: <4k170m$ddo@hobbes.compusult.nf.ca>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!news.compusult.nf.ca!mworden
From: mworden@public.compusult.nf.ca (Mark Worden)
Newsgroups: comp.sys.amiga.multimedia
Subject: Re: Proper mask, transfer rate, etc.
Date: 4 Apr 1996 19:14:26 GMT
Organization: Compusult Limited - Public Access Unix
Message-ID: <4k172i$ddo@hobbes.compusult.nf.ca>
References: <4k170m$ddo@hobbes.compusult.nf.ca>
NNTP-Posting-Host: public.compusult.nf.ca
X-Newsreader: TIN [version 1.2 PL2]

Reply to Parent Message