Ariadne w/Shape Shifter 3.2?

Article View: comp.sys.amiga.networking

Article #160

Back to comp.sys.amiga.networking Previous Next

#160

From: Scott J Cape
Date: Mon, 18 Sep 1995 21:12

19 lines
1514 bytes

Anyone got this combination working properly?  When i boot ShapeShifter
3.2, I get a warning like:  Your ethernet board does not support
multicast.  It is unusable with AppleTalk.  Page 35 of my Ariadne book,
however, says the board DOES suppport multicast.  Also, when I select
the Network control panel from the Mac side, I select EtherTalk, and it
says No Zones Available.  I know this is not true (there are several
REAL mac users using EtherTalk just fine here).  

The main questions here are how do I get the Ariadne board to work with
ShapeShifter, and what Mac Networking software should I have installed?
I'm using Mac System 7.5 by the way...
Scott Cape                                   cape+@andrew.cmu.edu
=================================================================
Amiga 4000/040 25 MHz           |                Ariadne Ethernet
10 Megs RAM                     |           AmigaDOS/MacOS/MS-DOS
120 Meg HD                      |
105 Meg SyQuest Removable       |                     SPAM RULES!
Emplant Deluxe (w/e586dx)       |
=================================================================

Technical Details

Message-ID: <4kLS2qC00YUvMxD0Mw@andrew.cmu.edu>

Path: arc1-ca.pugleaf.net!andrew.cmu.edu!cape+

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!andrew.cmu.edu!cape+
From: Scott J Cape <cape+@andrew.cmu.edu>
Newsgroups: comp.sys.amiga.networking,comp.sys.amiga.emulations
Subject: Ariadne w/Shape Shifter 3.2?
Date: Mon, 18 Sep 1995 17:12:22 -0400
Organization: Freshman, CIT Undeclared, Carnegie Mellon, Pittsburgh, PA
Message-ID: <4kLS2qC00YUvMxD0Mw@andrew.cmu.edu>
NNTP-Posting-Host: po8.andrew.cmu.edu