🚀 go-pugleaf

I know this is a common one but I need help with this utterly frustrating
installation process..

Ive got a few more days left with this "trial" period for TIA and have 
not successfully installed Amitcp3.0b2 OR Amitcp-demo-4.0..

I am running on an 030 8 meg 1200.

I have tried several times installing by the AmitcptoTIA FAQ by 
Robr..Which seemed to get me farther than I have previously but still not 
correctly..

I also believe that TIA is running correctly on my shell account..see below..



I log into My Internet Provider and goto shell initiate TIA...It says 
Ready to Start ...
So I successfully quit term, stay online, goto shell and..

When I initiate "STARTNET" I dont receive error messages...this is what I 
get..

add host 192.0.2.1 :  gateway localhost
add net default: gateway 199.170.121.2

All apears well...But nothing works..

I have made sure that my baud rates in term program match the ENV slip 
config files..

When I Ping the IP address of my internet provider it sends 1 packet then 
continues to fail resulting in 100 % packet loss...

The ONLY thing that seems to work (And is flaky) is TELNET to the IP 
address of my internet provider...This works..!
But only if I enter the IP address not the xxx.xxxx.xxx ..
Finger, Ncftp, nothing else gets me anything.. I do see data being SENT 
my nothing is returned..!


Anyways, I would salute anyone that could help me get this up and running.

Thanks Very Much in Advance
JB


 ==================================================
 == Jason Buecker            tamaman@america.net ==
 == Trace Mutts Prod.                            ==
 == Atlanta, GA                                  ==
 ==                                              ==
 ==   -Amiga Supporter, and always will be !!!-  ==
 ==================================================