'spar' sana ii driver

Article View: comp.sys.amiga.networking

Article #5294

Back to comp.sys.amiga.networking Previous Next

#5294

From: roue
Date: Thu, 07 Mar 1996 23:10

14 lines
1209 bytes

Hi Folks,
 
 I've been trying to run amitcp over my multiface III board's parallel port via
a combination of the pianet.device included, coupled with "spar" found on the 
comm/net directory of aminet. Spar is a sanaii driver that's supposed to use
parnet devices, for just such a purpose. If anyone's had any experience with 
getting this thing to work I'd really appreciate it. Thus far it does nothing 
on my 3000 and just crashes the 500 (500 using parnet.device for the internal 
parallel port, compiled for the 030). I know the parnet devices work because
I've been using them to share directories between the two machines (parNFS),
but can't seem to get amitcp to work through them. Any suggestions?
  thanks
    Matt
      boc4@midway.uchicago.edu

Technical Details

Message-ID: <Dnx70z.8MD@midway.uchicago.edu>

Path: arc1-ca.pugleaf.net!news.luc.edu!uchinews!woodlawn!boc4

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.amiga.networking
Path: arc1-ca.pugleaf.net!news.luc.edu!uchinews!woodlawn!boc4
From: boc4@woodlawn.uchicago.edu (roue)
Subject: 'spar' sana ii driver
X-Nntp-Posting-Host: midway.uchicago.edu
Message-ID: <Dnx70z.8MD@midway.uchicago.edu>
Sender: news@midway.uchicago.edu (News Administrator)
Reply-To: boc4@midway.uchicago.edu
Organization: University of Chicago -- Academic Computing Services
Date: Thu, 7 Mar 1996 23:10:11 GMT