🚀 go-pugleaf

Valiant (vmarti@xmission.xmission.com) wrote:
> Thanks for all the helpful advice.  Choosing "install for real" took 
> care of the problem and I was able to configure AmiTCP.  However, now 
> when I run the script to connect to my local ISP, I get a requestor from 
> AmiTCP:bin/ifconfig that says 'AmiTCP/IP version 4 or later must be 
> started first'.  The window for AmiTCP does open first, but I have to 
> wait about a minute before I can click on the OK button and proceed.  Do 
> I need to register AmiTCP 4.0 in order to bypass the window and allow 
> ifconfig to work correctly?  Thanks in advance for any suggestions...

You need to buy AmiTCP if you don't want to wait around for the window.

But the ifconfig problem suggests a misconfiguration.

I would guess that either,

WaitForPort is failing - check that you have Waitforport in your
                         SYS:Rexxc directory and that it is in your path.
or

You have 'Run >NIL: AmiTCP:AmiTCP' in your Startnet script.

4.0 demo should not be 'run' (unlike the other versions).

The line should simply say 'AmiTCP:AmiTCP'

Phil
-- 
Philip Stokes                                   phil@stokes.demon.co.uk
Hertfordshire
England