🚀 go-pugleaf

On Tue 12-Mar-1996  2:12p, David Buonomo wrote:
DB> "WaitForPort: Unkown Command
DB> Failed returncode 10"

I have seen that error on DOZENS of A2000's.  Your basic problem is that
SYS:Rexxc isn't in your path.  (Of course , Arexx should be started first!)
To fix your path, there are two basic fixes that you need to perform.

Step #1:  Edit the file S:Shell-Startup and modify your file to contain the
following:

                path SYS:Rexxc add


Step #2:  Add the line "loadwb NewPath" as the LAST LINE of your
S:User-Startup file.  The function of this command is to inform workbench of
any paths you have assigned in your startup-sequence.  Due to the
multi-tasking nature of your amiga, its possible that the "LoadWB" in the
S:Startup-Sequence will be performed BEFORE the S:User-Startup completes.
This basically takes an additional "Snapshot" of your path for workbench.  It
does NOT re-load workbench.


Hope that the above helps!  Arexx has the command "WaitforPort" in the
directory SYS:Rexxc assuming you have a "normal" setup for your OS.