🚀 go-pugleaf

On or about 22-Mar-96 08:23:35 daleburrell typed the following words about
"help with dial script".  My reply is thus...

 Hi daleburrell,


 d> Can someone help me get my dialup script for 'PPP.device'
 d>
 d> I do connect now, but that all that happen.
 d>
 d> I think what the service want is to get started first by
 d> sending 2 CR.
 d> Then it ask for my 'username:'
 d> Next it asks for my 'password:'
 d>
 d> Then finally  it asks me to   1) Start PPP\n
 d>                               2) Telnet to the Server\n
 d>                               3) EXIT\n
 d>                                \n
 d>                                Enter Number:
 d>
 d>
 d> __________________here_is_my_capture_____________________________
 d>
 d>
 d> Annex Command Line Interpreter   *   Copyright 1991 Xylogics, Inc.
 d>
 d>
 d>
 d> Checking authorization, Please wait...
 d>
 d> Annex username: **********
 d>
 d> Annex password: ************
 d>
 d>
 d>
 d> Permission granted
 d>
 d> Welcome to The Internet Ramp\n
 d> \n
 d> 1) Start PPP\n
 d> 2) Telnet to the Server\n
 d> 3) EXIT\n
 d> \n
 d> Enter Number:
 d> 3
 d>
 d>
 d>
 d> Resetting line and disconnecting.
 d>
 d>
 d>
 d>
 d>
 d> NO CARRIER
 d>
 d> __________________HERE_IS_MY_DIALUP_SCRIPT________________________
 d>
 d> #
 d> ECHO OFF
 d> TIMEOUT 3600    ; Set maximum wait time (in ticks)
 d> REDIAL "BUSY"   ; Redial on busy signal
 d> DELAY 100
 d> SEND ""
 d> DELAY 50                                 _____________________________
 d> SEND "atz"     ; Initialize the modem   |It seens to get stuck here.
 d> DELAY 20                                |I've tried WAIT "CT"
 d> WAIT "K"        ; Wait for the OK      / and        WAIT "14"
 d> SEND "ATDT2539040" ; Dial             /
 d> WAIT "BIS"       ; Wait for connect <-  but still nothing happens


The WAIT command waits for a string from the modem. I dont see "BIS",
"CT" or "14" in your capture above. Do you send the two carriage returns and
then see the line "Annex Command Line Interpreter   *   Copyright 1991
Xylogics,Inc."? If so then instead of WAIT "BIS" do a WAIT "Connect", this is
what your modem sends when it gets a connection. Then send your two carriage
returns. You can leave the DELAY 10 in there just to let everything settle
down, but it might not be necessary. Check with a terminal program to make
sure what your modem sends when it connects. It should send the word "Connect"
at least but it may not be a capital C.


 d> DELAY 10                              \
 d> SEND ""                                 \
 d> SEND ""                                  |
 d> WAIT "name:"        ; Wait for Name:     |____________________________
 d> SEND "*********" ; Send your User ID
 d> DELAY 20
 d> WAIT "d:"         ; Wait for Password:
 d> SEND "**********" ; Send your password
 d> DELAY 50

Don't do a DELAY 50 here, that might not be enough time in some cases. Do a
WAIT "Number:" and then SEND"1".  Remember the WAIT command is case sensitive
so for example "Connect" is not the same as "connect".

 d> SEND"1"
 d> #END
 d> _________________________________________________________________
 d>
 d> Please help me to get connected. you will be helping me and a couple
 d> of others try this Service.
 d>
 d> I've go on the service by call with another COMM program and then on
 d> the menu switch on 'serial quiet' then launch PPP(startnet). What a
 d> hassle!

Hope this helps. If you have any more problems just email me. :<)

--
      //        -= John =-    jsburger@xmission.com    BIX: jburger
    \X/                                                                 Via
                             Amateur Radio   KB0ES                       T
 Amiga  2000                                                             H
 A2630 A2632            John S. Burger       Hooper, UT                  O
2+14megs  RAM                                                            R
  850meg HD             This message was composed on...                2.23ß
 Iomega  ZIP                  23-Mar-96 14:58:39 MST
--

A lie that can be passed off as truth becomes truth.