🚀 go-pugleaf

Help!


  I've spent many many hours trying to get AmiTCP to work with my
internet provider. I have - A1200 / DKB 68030/50Mhz/MMU/FPU / 10 Meg
RAM / WB3.0 / AmiTCP4.0 demo / PPP demo software / Socket lib software.

 Heres what happens:

  I install socket.library, AmiTCP and PPP device, making all of the
changes required to ppp0.config in SANA2 (in envarc:), startnet, stopnet,
etc. 
  I open a shell and run startnet and get:
-------------------------------------------------------------------
13.BOOT:System> startnet
login: sacabit
AmiTCP/IP version 4.0 demo
Copyright  1994 AmiTCP/IP Group,
                 Network Solutions Development Inc., Finland.
Copyright  1980--1991 The Regents of the University of California.
            All rights reserved.
S2_ONLINE: Resource allocation failure
AmiTCP:Bin/Online failed returncode 10
13.BOOT:System>
-------------------------------------------------------------------

  A "dialling" window comes up and shows my dialscript, but the
modem does not change states, and does not dial. It does do the
"ATZ" and WAIT "OK" command, so it is getting executed. Arexx is
properly installed, and WaitForPort does work properly, as tested
from a shell.
  Heres what SnoopDOS shows during this process:
-------------------------------------------------------------------
SnoopDos logging started on Saturday, 02-Mar-96 at 20:11:24

 Count Process Name       Action     Target Name                 Options Res.
 ----- ------------       ------     -----------                 ------- ----
 116   [14] EXECUTE       Open       PROGDIR:startnet            Read    OK
 117   [14] EXECUTE       Open       T:Command-00-T14            Write   OK
 118   [14] EXECUTE       Open       T:Command-00-T14            Read    OK
 119   ramlib             Load       AmiTCP:libs/usergroup.libra         OK
 120   ramlib             Load       LIBS:bsdsocket.library              Fail
 121   ramlib             Load       DH0:System/bsdsocket.librar         Fail
 122   ramlib             Load       LIBS:libs/bsdsocket.library         Fail
 123   ramlib             Load       DH0:System/libs/bsdsocket.l         Fail
 124   [14] AmiTCP:bin/lo ChangeDir  RAM:ENV
 125   [14] AmiTCP:bin/lo ChangeDir  DH0:System
 126   ramlib             Load       AmiTCP:devs/netinfo.device          OK
 127   netinfo.device     Open       AmiTCP:db/passwd            Read    OK
 128   [14] AmiTCP:bin/lo Open       AmiTCP:db/nologin           Read    Fail
 129   [14] AmiTCP:bin/lo ChangeDir  DH1:AMITCP4.0/HOME
 130   [14] AmiTCP:bin/lo ChangeDir  DH0:System
 131   [14] AmiTCP:bin/lo Open       AmiTCP:db/motd              Read    Fail
 132   netinfo.device     Open       AmiTCP:db/group             Read    OK
 133   [14] AmiTCP:AmiTCP Open       *                           Read    OK
 134   BackGround_Process ChangeDir  DH0:System
 135   BackGround_Process Open       NIL:                        Read    OK
 136   AmiTCP:AmiTCP      Open       AmiTCP:db/AmiTCP.config     Read    OK
 137   NETTRACE           Open       AmiTCP:db/hosts             Read    OK
 138   NETTRACE           Open       AmiTCP:db/networks          Read    OK
 139   NETTRACE           Open       AmiTCP:db/services          Read    OK
 140   [14] AmiTCP:Bin/On Open       AmiTCP:db/interfaces        Read    OK
/141   ramlib             Load       DEVS:Networks/ppp.device
 142   NETTRACE           Open       AmiTCP:db/protocols         Read    OK
 143   NETTRACE           Open       AmiTCP:db/resolv.conf       Read    OK
 144   NETTRACE           Open       AmiTCP:db/inet.access       Read    OK
\141   ramlib             Load       DEVS:Networks/ppp.device            OK
 145   [14] AmiTCP:Bin/On Open       ENV:SANA2/ppp0.config       Read    OK
 146   ramlib             Load       DEVS:serial.device                  OK
 147   ppp.device         Open       CON:20/50/400/140/Dialling. Write   OK
 148   ppp.device         Open       AMITCP:DIALSCRIPT           Read    OK

Closed SnoopDos log at 20:12:31
----------------------------------------------------------------------------
  As you can see, bsdsocket.library is not being created. Again, ARexx is
running and my Rexxc path is properly defined etc.

  Does anyone have any ideas? All help will be appreciated!

                                                        Thanks!

                                                     Scott A. Cabit
                                                   sac@mlb.cca.rockwell.com