🚀 go-pugleaf

>Help!


>  I've spent many many hours trying to get AmiTCP to work with my
>internet provider. I have - A1200 / DKB 68030/50Mhz/MMU/FPU / 10 Meg
>RAM / WB3.0 / AmiTCP4.0 demo / PPP demo software / Socket lib software.

> Heres what happens:

>  I install socket.library, AmiTCP and PPP device, making all of the
>changes required to ppp0.config in SANA2 (in envarc:), startnet, stopnet,
>etc.
>  I open a shell and run startnet and get:
>-------------------------------------------------------------------
>13.BOOT:System> startnet
>login: sacabit
>AmiTCP/IP version 4.0 demo
>Copyright  1994 AmiTCP/IP Group,
>                 Network Solutions Development Inc., Finland.
>Copyright  1980--1991 The Regents of the University of California.
>            All rights reserved.
>S2_ONLINE: Resource allocation failure
>AmiTCP:Bin/Online failed returncode 10
>13.BOOT:System>
>-------------------------------------------------------------------

>                                                        Thanks!

I had very similar problems to yourself when I first started (although, when I
first started I was using AmiTCP 3). The snoopdos report is almost identical
to the one that you got. I solved the problem by using an alternative
serial.device.

What modem are you using. I'm using a Pace Linnet and the original
serial.device does doesn't seem to like it. I use 8n1.device even though the
author of PPP recommends that you don't use it. So far it's the only device
driver that's worked for me. I might try baudbandit soon but for now my setup
is working and as the saying goes. If it ain't broke...don't fix it.

Hope this helps.

Steve Morriss        <stevemorriss@enterprise.net>