🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.amiga.networking
Article #5993

Re: SLIPCall4 V37.51

#5993
From: Gene Heskett
Date: Sat, 30 Mar 1996 07:03
58 lines
2978 bytes
 TD> Hi All,

 TD> Have been using SLIPCall4 Version 37.51 for some time now with my
 TD> Maestro
 TD> 9600XR modem and have had no problems connecting at 2400 to my
 TD> service provider.

 TD> I recently purchased a MULTITECH 28.8 modem and have not been
 TD> able to connect with my service provider since. I am using the
 TD> modem's default string of ATF\r as my initialising string. The
 TD> modem connects with my server usually at 26800. It then sends
 TD> login name and password, says "starting AmiTCP" and the modem
 TD> then goes offline.
Thats because (probably) you didn't tell it to ignore the status, so
when the path from the dialer is closed, it thinks its supposed to
hangup and does. The correct command is "At&D0"

BTW, don't be surprised if that multitech has connection problems
unless they fixed them. I tried to use an ISP that had their 28.8
cards in rack mounts, they were so bad one of them couldn't call its
neighbor over the dialup!  And of course I was always told it was my
modem anytime I was having a problem.  Well, after $700 worth of
modems all failed to connect properly, I got smart and changed the
ISP.  This one uses Supra Flashers similar to my Cardinal 28.8.
Works great now.


 TD> 31250 baud, RTS/CTS, 8N1.

Whoops! 31250 is a midi speed, and unless theres an awfully smart
modem out there on the end of the cable, it will be lost trying to
figure out what your computer is telling it.  Using seriel.device on
the stock hardware you will find isn't very reliable above 19,200.
YMMV of course, a 40 mhz 1200 could probably do 57,600 if you don't
multitask too heavily. Baud rates that are legal baud rates are the
powers of 2, starting at 1200 baud. eg, 1200, 2400, 4800. 9600,
19,200, 38,400 are the basic ranges, but then somehow 57,600 and
115,200 became part of the list, and they aren't powers of 2 from the
rest.  The next obvious one would have been 76,800 but it never
seemed to catch on.

 TD> The modem works fine with GPFAX and TERM 4.5.
At what baud rates?

 TD> Trevor Daley

 TD> <tsb> AMIGA A1200/030/40Mhz - 2meg Chip / 16meg Fast Ram -
 TD> 1.08Gig HD

 TD> Idiots do have a redeemable feature - mortality.
I've noticed, but why must we suffer for so long?


/*            Gene Heskett          |  I need help, please see my adv. */
/*  CE @ WDTV Weston/Clarksburg WV  |  in the newsgroup 'alt.tv.jobs'  */
/*  <gene_heskett@wvlink.mpl.com>   |  We are an equal opportunity and */
#include <std.disclaimer>           |  all that stuff employer.
Technical Details
Message-ID: <2508.6663T723T27@wvlink.mpl.com>
Path: arc1-ca.pugleaf.net!news.mountain.net!usenet
References: <1993.6657T478T53@merlin.net.au>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!news.mountain.net!usenet
From: gene_heskett@wvlink.mpl.com (Gene Heskett)
Newsgroups: comp.sys.amiga.networking
Subject: Re: SLIPCall4 V37.51
Date: 30 Mar 96 12:03:00 +0500
Organization: MountainNet, Inc. Morgantown WV 800.444.1458
Message-ID: <2508.6663T723T27@wvlink.mpl.com>
References: <1993.6657T478T53@merlin.net.au>
NNTP-Posting-Host: slip1.mpl.com
X-Newsreader: THOR 2.22 (Amiga;TCP/IP)