🚀 go-pugleaf

Flexy (starecjc@hydra.zrz.TU-Berlin.DE) writes:

>I just installed executive (ok.i promise i will read the WHOLE doc then ;)
>and have questions....
>
>Some tasks in amitcp (for.ex the rhcslip.device and other things) run
>at PRI +5... how should i configure executive ? Should it catch this
>tasks also by setting the catch-range value higher ?

  No, tasks that have priority higher than +1 - +2 are meant to be run
  at that priority. Scheduling them usually causes serious problems
  because these tasks wouldn't get enough CPU time.

  The current catch-range maximum, +2, is actually a bit too high,
  +1 would be better, and I intend to change it to that in Executive
  V2.00.

>Does anyone have a recommendation for "good" settings (what sheduler, what
>tasks i should enter in the executive-prefs with which values ?) for
>a system as is mine with AmiTCP and its clients running like Aweb,
>Ibrowse and so on ?

  Queues is definitely the best scheduler, much better than the Standard-
  scheduler. If you don't experience any problems with AmiTCP and it's
  clients, then there's no need to do anything. Otherwise please contact
  me and I'll see what's wrong.

  For latest information about Executive, see:

    http://www.megabaud.fi/~petrin/Executive.html

  Please also sign the guestbook I just added.
-- 
                                      __
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~///~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       Petri Nordlund             __///         petrin@megabaud.fi
 ---------------------------------\XX/----------------------------------