🚀 go-pugleaf

tldaley@merlin.net.au (Trevor Daley) wrote
in       comp.sys.amiga.networking
date:    23-Mär-96  22:57:05
subject: SLIPCall4 V37.51

> Hi All,

[...]
> have included an AmiTCP output as follows

> <sb>

> S2_ONLINE: Device driver is offline (Unit is currently offline)
> AmiTCP:bin/online failed returncode 10
> Login incorrect
> login:
> AmiTCP:Bin/login failed returncode 10
> add net 0.0.0.0: gateway localhost
> add net default: gateway 0.0.0.0: Object exists
> [CLI 2]

> <sb>

> My setup is as follows: AmiTCP Version 4.1, PPP Version 1.45 unregistered.
> Serial device is v34serial.device. Workbench serial preferences are set at
> 31250 baun, RTS/CTS, 8N1.

> The only changes made to the setup when changing to the new modem was serial
> rate set at 57600. When this did not work, all rates were set and various
> other initialisation strings were tried all with the same results.

Does your 'env:sana2/ppp0.config' have your new baudrate and device name?

<tsb>
 Syiad from Bad Nauheim, Germany
 Amiga ... what else?
--

Windows Error:00A  Promotional literature overflow. Mailbox full.