🚀 go-pugleaf

I have a GG2+ card and 2 ISA networkscard to my Amiga and PC.
I have set up all the hardware correct I think.

5.System2.0:> ShowConfig 
PROCESSOR:      CPU 68030/68882fpu/68030mmu
CUSTOM CHIPS:   ECS PAL Agnus (id=$0020), ECS Denise (id=$00FC)
VERS:   Kickstart version 40.70, Exec version 40.10, Disk version 40.29
RAM:    Node type $A, Attributes $505 (FAST), at $7800000-$7F7FFFF (7.5 meg)
        Node type $A, Attributes $703 (CHIP), at $400-$1FFFFF (~2.0 meg)
BOARDS:
 Board (unidentified):   Prod=2193/1($891/$1)
     (@$40000000, size 2meg, subsize same)
 Board + ROM (HD?) (unidentified):   Prod=2193/2($891/$2) (@$E90000 64K)
 Board (unidentified):   Prod=2150/1($866/$1) (@$200000 1meg)

And software

5.System2.0:> list devs:Networks/gg_ne2000.device 
Directory "devs:Networks" on Måndag 08-Apr-96
gg_ne2000.device            9620 ----rwed 19-Sep-93 18:36:42
1 file - 20 blocks used

5.System2.0:> getenv SANA2/gg_ne2000.config_0 
IRQ=3 IOADDR=0x300

part of my bin/startnet:

; IP address if known, _nothing_ otherwise Ulfs vfg är 172.0.2.2
.def IP    192.168.1.101
; Our full host name and aliases if known, _nothing_ otherwise
; (if this is set, the IP _must_ be set, too)
.def HN    "amiga.bravo.se Amiga"
; The destination address, needed only if GW is not good destination
.def DEST  
; netmask if known, _nothing_ otherwise
.def MASK  
; IP address of the default gateway if known, _nothing_ otherwise
.def GW    192.168.1.101
; Default login name
.def USER  Roland
; User's file creation mask
.def UMASK 022
; "SRV" if servers are used, _nothing_ otherwise
.def SRV   "SRV"
; "BOOTP" if bootstrap protocol is used, _nothing_ otherwise
.def BOOTP 
; Interface name
.def IFACE gg_ne2000
; Sana-II device configuration file, _nothing_ otherwise
.def S2CF  gg_ne2000.config
; Sana-II device configuration to be stored into the configuration file
.def S2OPT "IRQ=3 IOADDR=0x300 "

In db/hosts:

127.0.0.1 localhost
192.168.1.102 PC.bravo.se PC

In db/interfaces

#
# GoldenGate 2 Ethernet for NE2000 card
# NOTE: This needs an configuration file for the IRQ and ISA address settings!
#
gg_ne2000 DEV=DEVS:Networks/gg_ne2000.device UNIT=0

And the output
5.System2.0:> startnet
login: Roland
Last login: Mon Apr 08 14:24:24 1996 from Console
AmiTCP/IP version 4.2
Copyright © 1993 - 1995 AmiTCP/IP Group,
                 Network Solutions Development Inc., Finland.
Copyright © 1980 - 1991 The Regents of the University of California.
            All rights reserved.
[CLI 9]
OpenDevice: Device or unit failed to open
Interface gg_ne2000 not found!
Interface gg_ne2000 configuration failed!
Stopping AmiTCP
OpenDevice: Resource allocation failure

The output of Snoopdos gives this:

Count Process Name       Action     Target Name                     Options    Res.
----- ------------       ------     -----------                     -------    ----
1     [5] EXECUTE        Open       startnet                        Read       OK  
2     [5] EXECUTE        Open       T:Command-00-T05                Write      OK  
3     [5] EXECUTE        Open       T:Command-00-T05                Read       OK  
4     [5] AmiTCP:bin/log OpenDev    timer.device                    Unit 1     OK  
5     [5] AmiTCP:bin/log OpenDev    timer.device                    Unit 1     OK  
6     [5] AmiTCP:bin/log OpenRes    credential.resource                        OK  
7     [5] AmiTCP:bin/log Open       HOSTNAME                        Read       OK  
8     [5] AmiTCP:bin/log OpenDev    AmiTCP:devs/netinfo.device      Unit 0     OK  
9     netinfo.device     Open       AmiTCP:db/passwd                Read       OK  
10    [5] AmiTCP:bin/log Open       AmiTCP:db/nologin               Read       Fail
11    [5] AmiTCP:bin/log Open       AmiTCP:db/motd                  Read       Fail
12    [5] AmiTCP:bin/log OpenDev    AmiTCP:devs/netinfo.device      Unit 1     OK  
13    netinfo.device     Open       AmiTCP:db/group                 Read       OK  
14    [5] AmiTCP:bin/uma OpenDev    timer.device                    Unit 1     OK  
15    [5] AmiTCP:bin/uma OpenRes    credential.resource                        OK  
16    [10] AmiTCP:AmiTCP Open       *                               Read       OK  
17    BackGround_Process Open       NIL:                            Read       OK  
18    AmiTCP:AmiTCP      Open       AmiTCP:db/AmiTCP.config         Read       OK  
19    NETTRACE           Open       AmiTCP:db/hosts                 Read       OK  
20    NETTRACE           Open       AmiTCP:db/networks              Read       OK  
21    NETTRACE           Open       AmiTCP:db/services              Read       OK  
22    NETTRACE           Open       AmiTCP:db/protocols             Read       OK  
23    NETTRACE           Open       AmiTCP:db/resolv.conf           Read       OK  
24    NETTRACE           Open       AmiTCP:db/inet.access           Read       OK  
25    AmiTCP:AmiTCP      OpenDev    timer.device                    Unit 1     OK  
26    NETTRACE           OpenDev    timer.device                    Unit 1     OK  
27    [5] AmiTCP:bin/boo OpenDev    timer.device                    Unit 1     OK  
28    [5] AmiTCP:bin/boo Open       AmiTCP:db/interfaces            Read       OK  
29    [5] AmiTCP:bin/boo OpenDev    DEVS:Networks/gg_ne2000.device  Unit 0     Fail
30    ramlib             Open       ENV:SANA2/gg_ne2000.config_0    Read       OK  
31    ramlib             OpenDev    timer.device                    Unit 1     OK  
32    [5] EXECUTE        Open       AmiTCP:bin/stopnet              Read       OK  
33    [5] EXECUTE        Open       T:Command-01-T05                Write      OK  
34    [5] EXECUTE        Open       T:Command-01-T05                Read       OK  
35    ARexx              Open       *                               Write      OK  
36    [5] offline        OpenDev    ppp.device                      Unit 0     Fail
37    BackGround_Process Open       NIL:                            Read       OK  

Puh, any idea what the problem is?

Sorry for the long text!

-- 
                              \|/
Thor 2.22 #1497               @ @
+--------------------------oOO-(_)-OOo----------+
| _ //       |                                  |
| \X/        |Falkenberg, Westcoast of Sweden   |
|A3000/10MB  |                                  |
|280HD/28.8  |                                  |
|GVP Spectrum|                                  |
|AFS Pro     |Amiga-Programmer in C             |
+------------+----------------------------------+

--