🚀 go-pugleaf

After Installing and configurating AmiTCP 4.2 i reseted my Amiga 1200
(4mb Fastram) and typed Startnet from shell.

then this came up on the screen:


login:Pmortenbo
AmiTCP/IP version 4.2
Copyright 1993 - 1995 AmiTCP/IP group,
               Network Solutions Development Inc., Finland.
Copyright 1980 - 1991 The Regents of the University of California.
          All rights reserved.


Then after about 30-60 sec this came up:

[CLI 4]
DEVS:Networks/ppp.device: Device driver is offline (Unit is currently 
offline)
Could not get DEVS:Networks/ppp.device (unit 0) online.
This may be due to possible configuration error of the Sana2 driver.
Interface ppp0 not found!
Interface ppp0 configuration failed!
Stopping AmiTCP




This happens after I typed Startnet from  Shell ( SnoopDos listing)!!!


Count Process Name       Action     Target Name                 Options 
Res.
----- ------------       ------     -----------                 ------- 
----
1     [5] EXECUTE        Open       PROGDIR:startnet            Read    
OK  
2     [5] EXECUTE        Open       T:Command-00-T05            Write   
OK  
3     [5] EXECUTE        Open       T:Command-00-T05            Read    
OK  
4     ramlib             Load       AmiTCP:libs/usergroup.libra         
OK  
5     ramlib             Load       LIBS:bsdsocket.library              
OK  
6     [5] AmiTCP:bin/log ChangeDir  Ram Disk:ENV                        
    
7     [5] AmiTCP:bin/log Open       HOSTNAME                    Read    
OK  
8     [5] AmiTCP:bin/log ChangeDir  WORK:AmiTCP-4.2                     
    
9     ramlib             Load       AmiTCP:devs/netinfo.device          
OK  
10    netinfo.device     Open       AmiTCP:db/passwd            Read    
OK  
11    [5] AmiTCP:bin/log Open       AmiTCP:db/nologin           Read    
Fail
12    [5] AmiTCP:bin/log ChangeDir  WORK:                               
    
13    [5] AmiTCP:bin/log ChangeDir  WORK:AmiTCP-4.2                     
    
14    [5] AmiTCP:bin/log Open       AmiTCP:db/motd              Read    
Fail
15    netinfo.device     Open       AmiTCP:db/group             Read    
OK  
16    [4] AmiTCP:AmiTCP  Open       *                           Read    
OK  
17    BackGround_Process ChangeDir  WORK:AmiTCP-4.2                     
    
18    BackGround_Process Open       NIL:                        Read    
OK  
19    AmiTCP:AmiTCP      Open       AmiTCP:db/AmiTCP.config     Read    
OK  
20    NETTRACE           Open       AmiTCP:db/hosts             Read    
OK  
21    NETTRACE           Open       AmiTCP:db/networks          Read    
OK  
22    NETTRACE           Open       AmiTCP:db/services          Read    
OK  
23    NETTRACE           Open       AmiTCP:db/protocols         Read    
OK  
24    NETTRACE           Open       AmiTCP:db/resolv.conf       Read    
OK  
25    NETTRACE           Open       AmiTCP:db/inet.access       Read    
OK  
26    [5] AmiTCP:bin/boo Open       AmiTCP:db/interfaces        Read    
OK  
27    ramlib             Load       DEVS:Networks/ppp.device            
OK  
28    [5] AmiTCP:bin/boo Open       ENV:SANA2/ppp0.config       Read    
OK  
29    [5] AmiTCP:bin/boo Open       S:PPP.key                   Read    
OK  
30    ramlib             Load       DEVS:serial.device                  
OK  
31    [5] EXECUTE        Open       AmiTCP:bin/stopnet          Read    
OK  
32    [5] EXECUTE        Open       T:Command-01-T05            Write   
OK  
33    [5] EXECUTE        Open       T:Command-01-T05            Read    
OK  
34    [5] EXECUTE        Delete     T:Command-00-T05                    
OK  
35    ARexx              Open       *                           Write   
OK  

I would appreciate if you could help me with this!

If you have a solution to this problem, please e-mail me!

E-mail:skjelbre@telepost.no