🚀 go-pugleaf

Hi there Jonathan Waland, I believe it was you who said:
> Joseph Waldvogel (joewald@a.crl.com) wrote:

>: If Miami works, then why not keep using it!  As for another device for
>: AmiTcp, why not use SLIP or CSLIP that come with AmiTCP in the first

> I use amitcp because I am (other than this speed problem) happy with it.
> I have everything set up as I want it. (but I have tried Miami)

If you're happy with your AmiTCP setup, then there's no reason to use
miami, except curiousity :)

>: place?  None of them have Built in dialers though.  The ONLY one with
>: a Dialer built in would be AmiPPP.  So if you want to use the
>: ppp.device then use AmiPPP.

>: a Normal Amiga is not going to support such a speed in the first place
>: don't ya?  Really need a 040 or 060 processor, and even then it's a
>: maybe.  SOme people say you can with a 030, but I had no luck with my
>: 50Mzh 030 on my A1200. But then I don't use a 640x200 mode, but a High
>: Res MultiScan Productivity mode which is more depanding, and Screen
>: depth also makes a differance.  Best way is with a differnt serial
>: port other then commodores outdated slow built in serial port which
>: was fine for the A1000 back then when 9600 baud modems were still
>: rare, but not now.

It's down to the speed of the custom chips and DMA bus more than the
processor, so this doesn't apply with a serial card.

> oops - maybe I should have mentioned the spec: A4000/030 with 882, 
> enough memory (18meg), and a MULTIFACE III serial card.

> (which will run at 115200 with no problems)

I use AmiTCP, ppp.device and a MF3 with no problems at 115200, so it
/should/ work for you.


Neil
--
                     Neil Bothwick, Warrington, England
 Connected via Wirenet - The UK's first Amiga-only internet access provider
     Mail: info@wirenet.u-net.com   WWW: http://www.u-net.com/~wirenet/
--
 And all the Borg left was this copy of OS/2...