Janus Problems, Help!

Article View: comp.sys.amiga.tech

Article #10110

Back to comp.sys.amiga.tech Previous Next

#10110

From: RAN101
Date: Thu, 20 Oct 1988 23:29

23 lines
1550 bytes

I've got an Amiga 2000 and a bridgecard along with 3MB Ram and a Hard disk
The problem is, I can't get the Bridgecard to access virtual drives or convert
files using AREAD/AWRITE between systems.  I've got the device=jdisk.sys in my
config file, and have the jdisk.sys and jlink.exe files on my boot disk.
I'm only trying to access the virtual drives while the PCDisk program is runnin
g.  whenever i invoke the jlink,aread, or awrite commands, the pc side of the
system freezes and cannot be warm-booted. the only way to get back into the pc
side of the system is to reboot the entire system.

  I've tried recreating the config.sys file on my IBM boot disk, recopying the
 AREAD, AWRITE, JDISK, and JLINK files onto my disks.  I've also tried recopyin
g the Bridgecard software using the install procedure outlined in the bridgecar
d manual.

  None of these measures have worked.  The system last worked a couple of month
s ago just before i added a serial card to the PC side of the system.  I've
also tried retrying the procedure with the serial card removed but had the same
results.

  Can anyone help???  Any help I get would be appreciated.

Thanks in advance,
Robb Nedwick

Technical Details

Message-ID: <58127RAN101@PSUVM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ukma!psuvm.bitnet!ran101

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ukma!psuvm.bitnet!ran101
From: RAN101@PSUVM.BITNET
Newsgroups: comp.sys.amiga.tech
Subject: Janus Problems, Help!
Message-ID: <58127RAN101@PSUVM>
Date: 20 Oct 88 23:29:02 GMT
Organization: Penn State University - Center for Academic Computing
Lines: 22