Re: Proportional joysticks

Article View: comp.sys.amiga.tech

Article #10213

Back to comp.sys.amiga.tech Previous Next

#10213

From: John Schultz
Date: Sun, 06 Nov 1988 03:03

10 lines
880 bytes

  I just put the necessary code in my vblank server and presto (just
read potx, poty then write potgo).  Works fine, but what we need now
are analog joysticks with either an adapter or correct value pots (~
1 meg)  With 470k ohm pots and following the Hardware Manual docs,
we can only generate values from 0..49; 1 meg pots bring this range
up to 0..255.  Is this an error in the Hardware Manual or are we
doing something wrong?

  John

Technical Details

Message-ID: <6@sdcc10.ucsd.EDU>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!ukma!rutgers!ucsd!sdcc6!sdcc10!cs161agc

References: <3086@amiga.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!ukma!rutgers!ucsd!sdcc6!sdcc10!cs161agc
From: cs161agc@sdcc10.ucsd.EDU (John Schultz)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Proportional joysticks
Keywords: interrupt handler
Message-ID: <6@sdcc10.ucsd.EDU>
Date: 6 Nov 88 03:03:27 GMT
References: <3086@amiga.UUCP>
Reply-To: cs161agc@sdcc10.ucsd.edu.UUCP (John Schultz)
Organization: University of California, San Diego
Lines: 10

Reply to Parent Message