🚀 go-pugleaf

In article <13249@oberon.USC.EDU> papa@pollux.usc.edu (Marco Papa) writes:
>
>This is from a fellow with bad news feed...<text ommitted for brevity>
>
>If you want to claim the serial port (or parallel or some such) without
>the supplied driver, you are supposed to use resources.lib to
>get it exclusively. The RKM's are short of being crystal clear on how this
>works. Anybody care to clarify how to claim the serial port for example?
>

This question is covered in more detail in an upcoming article
in Amiga Mail.  Until then, here is a quick summary of the topic.

In order to get direct access to the parallel/serial hardware in a way that 
is compatible with multi-tasking, you should use the GetMiscResource() and
FreeMiscResource() routines.  These two routines let you temporarily bar
other tasks from using the resource.  You may then use the associated
hardware directly for your special purposes and then return the resource
back to the system for other tasks to use. (!!!)

GetMiscResource() and FreeMiscResource() are descirbed in Appendix C of the
ROM Kernel Manual: Libraries and Devices.  Since these two routines do not
have a library base pointer name, they can only be called from an assembly
language program.  Here's a working example that gets one of the two 
miscellaneous resources.  Code courtesy of Bryce Nesbitt.

   *
   * Assembly language fragment that grabs the serial port registers
   * (using the misc.resource), and never gives them back.  Of course
   * a real program would ALWAYS return a resource that it has taken over
   * after it was all done using it.  This program never ends.  It waits
   * forever.  This is also a bad thing to do in your programs.

   JSRLIB     MACRO
   XREF       _LVO\1
              JSR_LVO\1(A6)
   ENDM

   XREF       _AbsExecBase
   INCLUDE    "resources/misc.i"

              move.l  _AbsExecBase,a6
              lea.l   MiscName(pc),a1
              JSRLIB  OpenResource
              tst.l   d0
              beq.s   no_open
              move.l  d0,a6               ;resource base in A6

   ;
   ; The resource is now open.  Call one of it's library-like vectors.
   ;
              move.l  #MR_SERIALBITS,d0
              lea.l   MyName(pc),a1
              jsr     MR_ALLOCMISCRESOURCE(a6)
              tst.l   d0
              bne.s   no_get              ;Someone else got it

   ;
   ; We just stole the serial port registers.  Wait forever.
   ; Nobody else can use the serial port, including the serial.device!
   ;
              move.l  _AbsExecBase,a6
              moveq   #0,d0              ;Wait for nothing (forever)
              JSRLIB  Wait
   ;
   ;  INSTEAD OF WAITING FOREVER, YOU COULD PUT YOUR OWN
   ;  CODE HERE.  AFTER YOU ARE ALL DONE, RETURN THE 
   ;  RESOURCE WITH FREE_MISC_RESOURCE() !!  THANK YOU.
   ;
   no_get
   no_open    moveq   #21,d0
              rts

   MiscName   dc.b    'misc.resource',0
   MyName     dc.b    'Serial Port hog',0
              END


Note that there are two serial.device resources to take over, MR_SERIALBITS
and MR_SERIALPORT.  You should get both resources when you take over the
serial port to prevent other tasks from using them.  The parallel.device
also has two resources to take over.  See the resources/misc.h include file
for the relevant C definitions and structures. 

Under V1.3 and earlier versions of the Amiga system software, there is a bug
in the way the the serial and parallel port resources are handled.  That is,
the GetMiscResource() routine will always fail if the serial.device has
been used at all by another task - even if that task is done using the
resource.  In other words, once a printer driver has been activated, it will
keep the associated resource locked up preventing your task from using it.

One way around this is to cause a 'memory panic' with the Exec call
AllocMem(0x7FFFFFFFL,0L).  This will cause libraries and resources not
currently in use to be flushed.  However this method has some drawbacks.  It
is unfriendly to other tasks that may be running in the system.  If the user
goes back to a library-based task after a general memory expunge, the user
might be required to reload large libraries from floppy disk.  What is
needed is a less drastic way to get a resource back from a device driver
which has a hold on it.  The code shown below will do this:
 
  /*
   * A safe way to expunge ONLY a certain device.  The serial.device holds
   * on to the misc serial resource until a general expunge occurs.
   * This code attempts to flush ONLY the named device out of memory and
   * nothing else.  If it fails, no status is returned since it would have
   * no valid use after the Permit().  Code by Bryce Nesbitt.
   */
   #include "exec/types.h"
   #include "exec/execbase.h"

   void FlushDevice(char *);

   extern struct ExecBase *SysBase;
 
   void FlushDevice(name)
   char  *name;
   {
   struct Device *devpoint;

       Forbid();
       if( devpoint=(struct Device *)FindName(&SysBase->DeviceList,name) )
       RemDevice(devpoint);
       Permit();
   }


Hope this helps.


-- 
 Dan Baker, CATS