AT board config problem

Article View: comp.sys.amiga.tech

Article #1029

Back to comp.sys.amiga.tech Previous Next

#1029

From: Francois Rouaix
Date: Sun, 27 Aug 1989 11:13

21 lines
1164 bytes


Hello,
One more time, I'm requesting your help for a user of my BBS.
The problem is:
1)  A2000 + PC AT 2286 board.
    This board is configured at address D000 as requested by
    the docs.
2)  A PC communication board. This board may be configured at any address
    0000, 1000, 2000, .... D000, ... F000, but needs 64Ko of memory
    above this address.
It seems therefore that he must change the address of the AT board
to be able to use his communication board. Is it possible ?
Or are there any other solutions ?
Thanks for your help.

-- 
*- Francois Rouaix                 //       We are all prisoners here,       *
*- rouaix@inria.inria.fr         \X/           of our own device             *
*- SYSOP of Sgt. Flam's Lonely Amigas Club. (33) (1) 39-55-84-59 (Videotext) *
Disclaimer: Opinions expressed are my own, not those of my employer.

Technical Details

Message-ID: <1388@inria.inria.fr>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!inria!rouaix

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!inria!rouaix
From: rouaix@inria.inria.fr (Francois Rouaix)
Newsgroups: comp.sys.amiga.tech
Subject: AT board config problem
Keywords: address conflict
Message-ID: <1388@inria.inria.fr>
Date: 27 Aug 89 11:13:19 GMT
Organization: FR.A.U.G.
Lines: 20