SPEAK:

Article View: comp.sys.amiga.tech

Article #10298

Back to comp.sys.amiga.tech Previous Next

#10298

From: Martin J Brown-Jr
Date: Wed, 16 Nov 1988 09:39

23 lines
1106 bytes

I'm having a problem accessing the speak: device in direct phoneme mode.
According to the 1.3 Enhancer Manual the option "/a1" should bypass the trans-
lator sending the "string" directly to the narrator device.
When I:
        "1>echo > speak:opt/r/p130/s125/d1 "helllo leesa""
The amiga (a1000) outputs: "hello Lisa" (roughly :->  ).

But when I:
           "1>echo > speak:opt/r/p130/s125/d1/a1 "kumpyuw5ter" (<< RKM ex.)
The amiga output is silent.

If I repeat the previous line without the "/a1",
The amiga outputs: "compuIVEter" (my caps).

If my reading of the RKM narrator device section and the enhancer manual is
correct, the "5" should have indicated a stress on syllable without the
pronunciation of the word "fIVE" in the middle.

Any ideas? CATS?

Thanx!!

                                      - MJB -

Technical Details

Message-ID: <11377@cup.portal.com>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!portal!cup.portal.com!MJB

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!portal!cup.portal.com!MJB
From: MJB@cup.portal.com (Martin J Brown-Jr)
Newsgroups: comp.sys.amiga.tech
Subject: SPEAK:
Message-ID: <11377@cup.portal.com>
Date: 16 Nov 88 09:39:09 GMT
Organization: The Portal System (TM)
Lines: 23