Re: StarDrive Problems

Article View: comp.sys.amiga.tech

Article #10361

Back to comp.sys.amiga.tech Previous Next

#10361

From: Greg Scott Miller
Date: Fri, 25 Nov 1988 01:31

18 lines
1314 bytes

I have a suggestion ..
 
 Check out your SCSI cable.  I had a bad connection in my 50 pin ribbon
cable between my hard drive controller and the StarDrive interface that
only failed under rare conditions.  Drove me NUTS looking for it.
 
 I had a HECKUVA time with that StarDrive interface.  I originally tried
to use it with an Adaptec 4000 controller, and had no luck.  Chatting with
the Microbotics folks revealed that they had a bit of a problem with the
driver software, and they'd fix it, and ship me out an updated driver ..
It took them over 4 months to do that, and when I got the new driver, it
didn't help me a bit.  The author of the driver wrote it using the extended
command set of SCSI, that the Adaptec 4000 didn't offer.  (The 4000A did
offer them, but I didn't OWN a 4000A ..)  Suffice to say I got tired of the
entire thing and wrote my own driver for it.  Has worked great ever since.
 
 - Greg
 GregM@cup.portal.com

Technical Details

Message-ID: <11749@cup.portal.com>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!portal!cup.portal.com!GregM

References: <d6vQJ5f6n31010dwNQo@amdahl.uts.amdahl.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!portal!cup.portal.com!GregM
From: GregM@cup.portal.com (Greg Scott Miller)
Newsgroups: comp.sys.amiga.tech
Subject: Re: StarDrive Problems
Message-ID: <11749@cup.portal.com>
Date: 25 Nov 88 01:31:58 GMT
References: <d6vQJ5f6n31010dwNQo@amdahl.uts.amdahl.com>
Distribution: na
Organization: The Portal System (TM)
Lines: 18

Reply to Parent Message