Article View: comp.sys.amiga.tech
Article #10460Re: Partitioning RAD:
From: Alan Bland
Date: Wed, 30 Nov 1988 15:58
Date: Wed, 30 Nov 1988 15:58
15 lines
1114 bytes
1114 bytes
In article <282@gtss.UUCP>, chas@gtss.UUCP (Charles Cleveland) writes: > When I set up RAD: under FFS (but not under SFS), I seemed to have to format > it before using it even though it was a single filesystem, contrary to your > remark above. My RAD: is setup under FFS as a single filesystem, and it does not need to be formatted. After mounting, RAD: is automagically formatted on cold boot (my MountList specifies Mount = 1, or whatever the parameter is, that tells it to load the handler immediately when mounted rather than waiting until the first access). Make sure your MountList includes both the FFS handler and the dos type (I forget the exact names of the parameters). -- // Alan Bland // AT&T Bell Laboratories, Denver CO // (303)-538-3510 - att!druwy!mab
Technical Details
Message-ID:
<3702@druwy.ATT.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!mtuxo!mtgzz!drutx!druwy!mabReferences:
<3012@sugar.uu.net> <282@gtss.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!mtuxo!mtgzz!drutx!druwy!mab From: mab@druwy.ATT.COM (Alan Bland) Newsgroups: comp.sys.amiga.tech Subject: Re: Partitioning RAD: Message-ID: <3702@druwy.ATT.COM> Date: 30 Nov 88 15:58:14 GMT References: <3012@sugar.uu.net> <282@gtss.UUCP> Organization: AT&T, Denver, CO Lines: 15