🚀 go-pugleaf

I just received my new ST296N hard drive.  Pretty slick, 80 Mb
28 msec access time, half height.

I have one problem.  I can't seem to get my Starboard SCSI module
to talk to it.  I use the DHMOUNT command with the following:

	LC=0 HC=100 BPT=34 S=6 I=1 D=StarDrive.device U=0

and I get a system requestor 

	'OpenDevice failure for device -- StarDrive.device'

I notice that the drive select light does flash, indicating that it is
at least seeing it's address.  The drive select light doesn't flash
when I select U=[1-7].

I'm running an A1000 with a Starboard 2, (2 Mb) + Starboard SCSI module.
I get the same error when using the installation software, or doing
the command by hand.

When using the Mountlist/Mount method, I don't get the error,
but I do get errors every time I try and access the mounted device.

Any clues or ideas would be much appreciated.

Please EMAIL, since my news feed does not appear to be 100% reliable.
-- 
Stu Donaldson          UUCP: uw-beaver!uw-nsr!uw-warp!gtisqr!stu
                       ARPA: uw-nsr!uw-warp!gtisqr!stu@beaver.cs.washington.edu
                       Bell: (206) 742-9111
PS: use one of the above return addresses, the From field is probably hosed.