BusErr on my Amiga

Article View: comp.sys.amiga.tech

Article #1107

Back to comp.sys.amiga.tech Previous Next

#1107

From: deraadt
Date: Fri, 01 Sep 1989 02:05

15 lines
1268 bytes

My Amiga 2000 gets a buserror (Guru 2) or locks up. Sometimes it will not
power up. The addition has been a 2088 Bridgecard, in the third last slot.
I also have a 2090A that has never caused me trouble. Sometimes on bootup
it now flashes the power light, I suspect a BERR inside of the autoconfig
chain is causing this. The flash rate is about 1Hz, maybe it's an error
code being flashed because it stops after a bit. It ran for about two days
with little some small problems, now not at all. I just took the card out,
and everything seems to work find again. My Amiga is rev4.3.

Is it the card? Bus loading? Any ideas from Dave Haynie? I'm about to pick
this thing up to be able to run some schematic cad, so I have to let the
guy know soon..
 <tdr.

Theo de Raadt                    (403) 289-5894     Calgary, Alberta, Canada

Technical Details

Message-ID: <1774@cs-spool.calgary.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!ubc-cs!alberta!calgary!enme.UCalgary.CA!deraadt

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!ubc-cs!alberta!calgary!enme.UCalgary.CA!deraadt
From: deraadt@enme.UCalgary.CA
Newsgroups: comp.sys.amiga.tech
Subject: BusErr on my Amiga
Message-ID: <1774@cs-spool.calgary.UUCP>
Date: 1 Sep 89 02:05:21 GMT
Sender: news@calgary.UUCP
Reply-To: deraadt@enme.UCalgary.CA ()
Organization: U. of Calgary, Calgary, Alberta, Canada
Lines: 15