DTR and serial.device

Article View: comp.sys.amiga.tech

Article #11212

Back to comp.sys.amiga.tech Previous Next

#11212

From: Jim Bolton
Date: Sat, 28 Jan 1989 09:57

25 lines
1542 bytes


I would like a bit of help concerning the Amiga's RS-232 port and serial
device.  I hope someone can help answer my question.

I've almost completed a bbs/conference application and early today was
looking at the way I handle DTR.  Currently to drop DTR I close the serial
device, wait 1 second, and then reopen the serial device.  This procedure
covers almost all modems, but does seem a bit awkward from what I've done on
other systems.

What I would like to do is inhibit DTR for n/10 seconds and if this doesn't
force hang-up then an online escape command could be issued to force the
modem to command mode where an explicit hang-up command could be issued.
This seems like a much better way to handle it.

So, I would like to know if it is possible to inhibit DTR on the Amiga's
RS-232 serial port and if so could you point me in the right direction.

Thanks in advance for any help!

------------------------------------------------------------------------- 
- CUTE SOFTWARE    Jim Bolton    P.O. Box 1496    Zephyr Cove, NV 89448 - 
- (702) 588-7179                    Call the CUTE BBS at (714) 532-5698 - 
-------------------------------------------------------------------------

Technical Details

Message-ID: <10511@well.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!apple!well!jimbo

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!apple!well!jimbo
From: jimbo@well.UUCP (Jim Bolton)
Newsgroups: comp.sys.amiga.tech
Subject: DTR and serial.device
Keywords: serial, RS232, modem
Message-ID: <10511@well.UUCP>
Date: 28 Jan 89 09:57:09 GMT
Distribution: usa
Lines: 25