Re: DTR and serial.device

Article View: comp.sys.amiga.tech

Article #11303

Back to comp.sys.amiga.tech Previous Next

#11303

From: Perry Kivolowitz
Date: Thu, 02 Feb 1989 12:24

22 lines
1318 bytes

That'd be fine by me Marco, but maybe Bryce isn't aware of the existence
of some weird pieces of equipment  out there which uses DTR as a control
line which must be diddled while other things are happened on the serial
port.

One kind of laser disk controller comes to mind....

Bryce....that approach (DTR  is  managed  by the open/close state of the
serial device) is completely fine for the general case...but...we should
have the (standard) ability to diddle the control lines for the patholo-
gical case of some particular types of hardware.

What do you say?

Perry


-- 
Perry Kivolowitz, ASDG Inc.
                          
ARPA: madnix!perry@cs.wisc.edu   {uunet|ncoast}!marque!
UUCP:   {harvard|rutgers|ucbvax}!uwvax!astroatc!nicmad!madnix!perry

Technical Details

Message-ID: <460@madnix.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!unmvax!ncar!tank!uwvax!astroatc!nicmad!madnix!perry

References: <10511@well.UUCP> <15000@oberon.USC.EDU> <443@madnix.UUCP> <15068@oberon.USC.EDU>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!unmvax!ncar!tank!uwvax!astroatc!nicmad!madnix!perry
From: perry@madnix.UUCP (Perry Kivolowitz)
Newsgroups: comp.sys.amiga.tech
Subject: Re: DTR and serial.device
Keywords: serial, RS232, modem
Message-ID: <460@madnix.UUCP>
Date: 2 Feb 89 12:24:08 GMT
References: <10511@well.UUCP> <15000@oberon.USC.EDU> <443@madnix.UUCP> <15068@oberon.USC.EDU>
Reply-To: perry@madnix.UUCP (Perry Kivolowitz)
Distribution: usa
Organization: ASDG Incorporated
Lines: 22

Reply to Parent Message