Re: using hardware handshaking on the SER: port

Article View: comp.sys.amiga.tech

Article #11476

Back to comp.sys.amiga.tech Previous Next

#11476

From: Joe Smith
Date: Wed, 15 Feb 1989 08:27

10 lines
1097 bytes

My experience with hardware handshaking is to make sure that the computer
always sees DSR and CD always high, and that CTS (Clear To Send) is used
by the device to do flow control.  Have you tried creating a cable that
connects your plotter's DTR to the Amiga's CTS with the Amiga's DSR high?

-- 
Joe Smith (408)922-6220 | jms@antares.Tymnet.COM or jms@opus.Tymnet.COM
McDonnell Douglas FSCO  | UUCP: ...!{ames,pyramid}!oliveb!tymix!antares!jms
PO Box 49019, MS-D21    | PDP-10:JMS@F74.Tymnet.COM  CA license plate:"POPJ P,"
San Jose, CA 95161-9019 | narrator.device: "I didn't say that, my Amiga did!"

Technical Details

Message-ID: <387@antares.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!amdahl!oliveb!tymix!antares!jms

References: <570@jc3b21.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!amdahl!oliveb!tymix!antares!jms
From: jms@antares.UUCP (Joe Smith)
Newsgroups: comp.sys.amiga.tech
Subject: Re: using hardware handshaking on the SER: port
Summary: Use CTS at the Amiga end
Keywords: serial.device hardware handshaking
Message-ID: <387@antares.UUCP>
Date: 15 Feb 89 08:27:24 GMT
References: <570@jc3b21.UUCP>
Reply-To: jms@antares.UUCP (Joe Smith)
Organization: Tymnet QSATS, San Jose CA
Lines: 10

Reply to Parent Message