Trouble with right mouse button

Article View: comp.sys.amiga.tech

Article #11577

Back to comp.sys.amiga.tech Previous Next

#11577

From: Brant Coghlan
Date: Fri, 24 Feb 1989 05:57

20 lines
1401 bytes

A friend of mine just gave his mouse a static shock treatment.  His
right mouse button will not work anymore.  Can anyone offer some
suggestions on how to fix his amiga 1000?

Some technical details might help out so here goes.  The mouse it self seems
to be ok.  Its got to be the POT0Y line that got frazzled.  This line
goes through a resistor and shares a capacitor before going into Paula
as pin #33.  A quick test of the POT0DAT register (address DFF012) indicates
that the up or down of the button is sensed, but holding down the button
does not change the register as it should.

All other functions seem to be ok.

Could Paula have been damaged?  If it is the capacitor, how can it be checked?
Any help would be appreciated.  Thanks in advance.
-Brant

-- 
 Brant Coghlan	(career student)  (403) 487-3619     ...!alberta!brant
 Dept. of Comp. Science, 615 GSB, U of Alberta, Edmonton, Alberta, Canada

Technical Details

Message-ID: <2073@pembina.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!bionet!csd4.milw.wisc.edu!leah!itsgw!steinmetz!uunet!ncc!alberta!brant

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!bionet!csd4.milw.wisc.edu!leah!itsgw!steinmetz!uunet!ncc!alberta!brant
From: brant@alberta.UUCP (Brant Coghlan)
Newsgroups: comp.sys.amiga.tech
Subject: Trouble with right mouse button
Message-ID: <2073@pembina.UUCP>
Date: 24 Feb 89 05:57:22 GMT
Reply-To: brant@alberta.UUCP (Brant Coghlan)
Distribution: na
Organization: U. of Alberta, Edmonton, Alberta, Canada
Lines: 20