🚀 go-pugleaf

I need some help from you experts out there in net land. I have built and 
installed a LUCAS board on my A1000. The board works fine and does 
everything promised. My problem is that I am no longer able to attach any
of my buss peripherals (CLtd controller and Pacific Peripherals expanderII) and
have it work correctly. The system goes through Kickstart fine, displays the
Workbench requestor, but when I insert the disk it attempts to read the first
block of data then GURU's with an 0000000B.xxxxxxxx. Resetting only returns 
this same error.
   With help from Brad Fowles (thanks Brad) it appears that the problem has
narrowed down to some sort of buss noise. I currently have the PAL grounding
and the buss terminator in place but those were not enough to make the 
problem go away.
   Would one of you kind people who know what you're doing give me some
suggestions as to what I might try to solve this problem. I have tried all
of the normal LUCAS suggestions (changing U9 etc.).
   If any of you 300 LUCAS builders out their have experienced this type of
problem please let me know what you did to solve it.
Thanks for your help.

Henry Bitter

* Pacific Bell  *         (415) 823-2836
San Ramon, Calif.
{ }!pacbell!pbhya!hbit

If I had a disclaimer I wouldn't give it away !