🚀 go-pugleaf

In article <424a49e8.1285f@maize.engin.umich.edu> beh@caen.engin.umich.edu (Bob Hruska) writes:
>
>I've got Manx 3.6a and I'm trying to compile the source to vt100 2.8,
>but it chokes every time on vt100.c and init.c with the following error:
>
>init.c:24: ERROR 49: multiply defined symbol: ConsoleDevice
>
>(the same for vt100.c)

The problem lies in how Manx chose to define ConsoleDevice.  The way that
they did it makes it unusable but it's required if you wanna use
RawKeyConvert() (I think that's the routine that requires it).  What you
need to do is to edit functions.h and either
1) comment out the definition and use the one that's in vt100
         -- or --
2) fix the definition in functions.h and comment out the one in vt100.

>By the way, Tony, is 2.9 going to be out soon enough that I am wasting my
>time with this?

Nope, it won't be out for a while yet (like, several months).  Sorry for
the delay.  I wanted to get it out around 09/88 but work and all has
gotten in the way.

>Bob Hruska   University of Michigan Computer Aided Engineering Network (CAEN)
>
>INTERNET: beh@caen.engin.umich.edu
>    UUCP: {umix|ucbvax|uunet}!caen.engin.umich.edu!beh
-- 
Tony Sumrall acs@pccuts.pcc.amdahl.com <=> amdahl!pccuts!acs

[ Opinions expressed herein are the author's and should not be construed
  to reflect the views of Amdahl Corp. ]