Re: ROTATION SPEED

Article View: comp.sys.amiga.tech

Article #12489

Back to comp.sys.amiga.tech Previous Next

#12489

From: Randell Jesup
Date: Wed, 03 May 1989 01:37

11 lines
961 bytes

In article <102409@sun.Eng.Sun.COM> cmcmanis@sun.UUCP (Chuck McManis) writes:
>On another note, if you want to vary the drive speed of an Amiga drive
>within the +/-5% it was specified at, usually an adjustment pot is provided
>on the bottom for that.

	Actually, we specify drives at +-1.5%.  However, we also allow +-5%
clock variation at the amiga end, so unless you're running a genlock, +-5%
isn't a problem.

-- 
Randell Jesup, Commodore Engineering {uunet|rutgers|allegra}!cbmvax!jesup

Technical Details

Message-ID: <6744@cbmvax.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!apple!oliveb!amiga!cbmvax!jesup

References: <89043012060267@masnet.uucp> <102409@sun.Eng.Sun.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!apple!oliveb!amiga!cbmvax!jesup
From: jesup@cbmvax.UUCP (Randell Jesup)
Newsgroups: comp.sys.amiga.tech
Subject: Re: ROTATION SPEED
Message-ID: <6744@cbmvax.UUCP>
Date: 3 May 89 01:37:16 GMT
References: <89043012060267@masnet.uucp> <102409@sun.Eng.Sun.COM>
Reply-To: jesup@cbmvax.UUCP (Randell Jesup)
Organization: Commodore Technology, West Chester, PA
Lines: 11

Reply to Parent Message