Kermit parameters in VT100 program

Article View: comp.sys.amiga.tech

Article #12577

Back to comp.sys.amiga.tech Previous Next

#12577

From: Joe Smith
Date: Wed, 10 May 1989 04:01

13 lines
1201 bytes

In article <790@pccuts.pcc.amdahl.com> acs@pccuts.pcc.amdahl.com (Tony Sumrall)
talks about testing version 2.9 of the VT100 program.  I'd like to know
"Where are all the Kermit settings?"

I have a definite need for SET RECEIVE TIMEOUT 90 (over a slow network).
The other things I haven't been able to find are:
	SET BLOCK-CHECK 3, SET FILE WARNING ON
Please add these to some menu.
-- 
Joe Smith (408)922-6220 | jms@antares.Tymnet.COM or jms@tymix.Tymnet.COM
McDonnell Douglas FSCO  | UUCP: ...!{ames,pyramid}!oliveb!tymix!antares!jms
PO Box 49019, MS-D21    | PDP-10:JMS@F74.Tymnet.COM  CA license plate:"POPJ P,"
San Jose, CA 95161-9019 | narrator.device: "I didn't say that, my Amiga did!"

Technical Details

Message-ID: <182@tardis.Tymnet.COM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!oliveb!tymix!tardis!jms

References: <696@solaria.csun.edu> <May.9.00.46.34.1989.2072@pilot.njin.net> <790@pccuts.pcc.amdahl.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!oliveb!tymix!tardis!jms
From: jms@tardis.Tymnet.COM (Joe Smith)
Newsgroups: comp.sys.amiga.tech
Subject: Kermit parameters in VT100 program
Message-ID: <182@tardis.Tymnet.COM>
Date: 10 May 89 04:01:29 GMT
References: <696@solaria.csun.edu> <May.9.00.46.34.1989.2072@pilot.njin.net> <790@pccuts.pcc.amdahl.com>
Reply-To: jms@tardis.Tymnet.COM (Joe Smith)
Organization: McDonnell Douglas Field Service Co, San Jose CA
Lines: 13

Reply to Parent Message