Re: Kermit parameters in VT100 program

Article View: comp.sys.amiga.tech

Article #12593

Back to comp.sys.amiga.tech Previous Next

#12593

From: Mike Farren
Date: Thu, 11 May 1989 10:06

17 lines
1352 bytes

In article <182@tardis.Tymnet.COM> jms@tardis.Tymnet.COM (Joe Smith) writes:
(Discussing VT100 version 2.9)
>I have a definite need for SET RECEIVE TIMEOUT 90 (over a slow network).
>The other things I haven't been able to find are:
>	SET BLOCK-CHECK 3, SET FILE WARNING ON
>Please add these to some menu.

Seems to me that if you wanted all the features of CKermit, what you
should get is CKermit, not VT100.  All of the "SET" commands you
refer to are CKermit commands, and not intrinsic parts of the Kermit
protocol (except for SET BLOCK-CHECK 3, and even that is a convenience
more than a necessity - do you really have trouble at BLOCK-CHECK 1?).

-- 
           Mike Farren
           uucp: {your favorite backbone site}!hplabs!well!farren
           Fido: Sci-Fido, Fidonode 125/84, (415)655-0667

Technical Details

Message-ID: <11627@well.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!apple!well!farren

References: <696@solaria.csun.edu> <May.9.00.46.34.1989.2072@pilot.njin.net> <790@pccuts.pcc.amdahl.com> <182@tardis.Tymnet.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!apple!well!farren
From: farren@well.UUCP (Mike Farren)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Kermit parameters in VT100 program
Message-ID: <11627@well.UUCP>
Date: 11 May 89 10:06:48 GMT
References: <696@solaria.csun.edu> <May.9.00.46.34.1989.2072@pilot.njin.net> <790@pccuts.pcc.amdahl.com> <182@tardis.Tymnet.COM>
Reply-To: farren@well.UUCP (Mike Farren)
Organization: Whole Earth 'Lectronic Link, Sausalito, CA
Lines: 17

Reply to Parent Message