Epson 1.3 driver exonerated!

Article View: comp.sys.amiga.tech

Article #1260

Back to comp.sys.amiga.tech Previous Next

#1260

From: Edgar LeBel
Date: Wed, 13 Sep 1989 12:55

14 lines
1053 bytes

	After whining plaintively about my printer problems I got a bunch
of good advice in return and now my problems are solved.  I covered up pin
14 on my Centronics connector with a piece of tape and get no more extra line-
feeds.  The typical programmer that I am, I never even considered that the
problem could have been caused by hardware.  If only this Epson pin 14
behaviour were documented somewhere more prominently than a single sentence 
in a 200+ page printer manual!  If only Commodore parallel cables didn't 
pass through that line!  If only the Enhancer manual mentioned it!  If only...

Thanks again to those who answered my query.

Hobie Orris
(impersonating Edgar Lebel)

Technical Details

Message-ID: <1989Sep13.085524.6487@jarvis.csri.toronto.edu>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!csri.toronto.edu!edgar

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!csri.toronto.edu!edgar
From: edgar@csri.toronto.edu (Edgar LeBel)
Newsgroups: comp.sys.amiga.tech
Subject: Epson 1.3 driver exonerated!
Message-ID: <1989Sep13.085524.6487@jarvis.csri.toronto.edu>
Date: 13 Sep 89 12:55:24 GMT
Distribution: na
Organization: University of Toronto, CSRI
Lines: 14