Article View: comp.sys.amiga.tech
Article #12625Re: TICK and J300
From: Andy Finkel
Date: Fri, 12 May 1989 16:29
Date: Fri, 12 May 1989 16:29
19 lines
1198 bytes
1198 bytes
In article <3319@hplabsz.HPL.HP.COM> dleigh@hplabs.UUCP (Darren Leigh) writes:
>60 Hz clock on it? My 2000 didn't work until I changed jumper J300
>from "normal" to "A500". What do I gain/lose by not having a power
>supply TICK? Will it matter at all?
Normally, the A2000 takes its 1/60sec (or 1/50) ticks from the power
lines, which should be fairly accurate. When you switch the jumper
to the "A500" position your A2000 then takes its ticks from the
video. Which is not quite as accurate.
--
andy finkel {uunet|rutgers|amiga}!cbmvax!andy
Commodore-Amiga, Inc.
"Do or Do Not. There is no Try." - Yoda, explaining the loop constructs
in JCL (Jedi Control Language).
Any expressed opinions are mine; but feel free to share.
I disclaim all responsibilities, all shapes, all sizes, all colors.
Technical Details
Message-ID:
<6854@cbmvax.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!cbmvax!andyReferences:
<3319@hplabsz.HPL.HP.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cbmvax!andy From: andy@cbmvax.UUCP (Andy Finkel) Newsgroups: comp.sys.amiga.tech Subject: Re: TICK and J300 Message-ID: <6854@cbmvax.UUCP> Date: 12 May 89 16:29:08 GMT References: <3319@hplabsz.HPL.HP.COM> Reply-To: andy@cbmvax.UUCP (Andy Finkel) Distribution: na Organization: Commodore Technology, West Chester, PA Lines: 19