Re: HP 9111A Graphics Tablet

Article View: comp.sys.amiga.tech

Article #12833

Back to comp.sys.amiga.tech Previous Next

#12833

From: Kent D. Polk
Date: Wed, 24 May 1989 16:53

25 lines
1584 bytes

In article <11640022@hpfcdc.HP.COM> stroyan@hpfcdc.HP.COM (Mike Stroyan) writes:
>The HP-IB interface, (aka IEEE-488 or GP-IB), is a type of
>bi-directional 8 bit parallel interface.  The only way I know to
>interface an HP 9111A to an Amiga would be through an ASDG Twin-X board
>and an IEEE-488 interface daughter board.  It would be decidedly not
>free.


ACDA Corp. also lists a GPIB card. It is a dedicated half-length card
that sells for $395 from the info I got from them. Supposedly also fits
some A1000 card-cages. Last I heard it didn't support DMA transfers.

I have no affiliation with ACDA, nor is this a recommendation, I just
got the info when looking at their other I/O products.

ACDA Corp, 220 Belle Meade Avenue, Setauket, NY 11733 - 516 689-7722


=======================================================
       Kent Polk - Southwest Research Institute
              kent@swrinde.nde.swri.edu
-------------------------------------------------------
       "Anything worth doing is worth overdoing"
(at least enough to be able to get this message posted)
=======================================================

Technical Details

Message-ID: <16638@swrinde.nde.swri.edu>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!swrinde!kent

References: <560@orange6.qtp.ufl.edu> <11640022@hpfcdc.HP.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!swrinde!kent
From: kent@swrinde.nde.swri.edu (Kent D. Polk)
Newsgroups: comp.sys.amiga.tech
Subject: Re: HP 9111A Graphics Tablet
Message-ID: <16638@swrinde.nde.swri.edu>
Date: 24 May 89 16:53:51 GMT
References: <560@orange6.qtp.ufl.edu> <11640022@hpfcdc.HP.COM>
Reply-To: kent@swrinde.UUCP (Kent D. Polk)
Organization: Southwest Research Institute, San Antonio, Texas
Lines: 25

Reply to Parent Message