🚀 go-pugleaf

In article <32275@auc.UUCP> rar@auc.UUCP (Rodney Ricks) writes:
                     [...]
>Sit down.  Are you ready?  I think that Chip RAM should be expanded to...
>at least 8 Megabytes.
                     [...]
I like this.  With the enormous address space available to the 32-bit
680X0 family, it would be really nice to make optional chip ram expansion
available to those who can afford it.
                     [...]
>I do think that the A3000 REALLY should have a scalable-speed asynchronous
>design.  By that, I mean that the user, by replacing the CPU and some other
>(socketed) chips, should be able to upgrade their 25Mhz A3000 to a 33 Mhz
>A3000 (unless you want to ship it as a 33Mhz machine ...).  They should also
>be able to upgrade it to a 50Mhz machine, and so on, when the CPU is available

Well, the only hard part is that the 50 Mhz version is probably going
to require a controlled impedance PC board (ie multiwire) and fully
terminated nets, which will cause the size, complexity, and expense
of the design to mushroom.  Most likely a 50 Mhz uP chip would have
to run asynchronously on a daughter card in the 3000, unless they are
planning on pricing it out of reach of most of us.
                     [...]
>I have a feeling that this isn't exactly an easy thing to engineer, but if
>it is done, it would have very interesting implications.  Commodore could
>sell several "versions" of the Amiga 3000, running at different clock rates,
>which would actually be the same machine, except for a few chips!

Except that the slower version would be *much* cheaper if it didn't
have to be capable of running at the higher speeds also.  The higher
speeds bring in a whole new set of design considerations.  That is
why really fast systems cost so much more.

--Steve
-------------------------------------------------------------------------
	  {uunet,sun}!convex!swarren; swarren@convex.COM